The installation of outdoor fitness equipment and the surrounding environment should meet the following requirements:
1. The horizontal distance of outdoor fitness equipment from overhead high and low voltage wires should not be less than 3 m; 5 m;
2. The place where the equipment needs to be used at night, within 2 m of the edge of the equipment, the illumination should not be less than 15;
3, outdoor fitness equipment should be away from flammable, explosive and toxic, harmful items, site fitness should be consistent with the state's safety regulations.
3. Horizontal fitness equipment such as horizontal bars, parallel bars, ladders, swings, etc. that bounce up or down, or may fall from the air, should have a soft or elastic cushioning floor, such as sand and rubber floors. In the case of a rubber floor, the structural thickness of the floor shall not be less than 25 mm; in the case of a sand pit, the thickness of the sand layer shall not be less than 200 mm, and the perimeter of the sand pit shall have an appropriate height of raised platform enclosure, and the ribs of the bosses. Edges and sharp corners should be set with rounded corners with a radius of not less than 10 mm.
Fourth, the distance between the body movement range of the sports station and the sports station should not be less than 1 m.
Fifth, the design and installation of outdoor fitness equipment should ensure stability, reliability and verticality. There should be no loosening and shaking of the foundation and support components.